Cart 0

Pike Dynamic

Pike Dynamic models and spare parts can still be ordered. Please contact us for delivery time and more information.  

PIKE DYNAMIC F5J
Producing a new model that will beat the competition is very difficult, you can be certain that we did it. The new Dynamic is more than you might expect at first sight. Although visually similar to the Perfection the Dynamic is an all new design. Two of the most important qualities of a F5J model are the ability to circle at very low altitudes while in a thermal and to be able to move around the sky with minimal loss in height. The Dynamic excels in both areas, combined with low flying weights and improved controllability in landing we believe the Dynamic is the perfect choice for F5J pilots.
The Dynamic was designed using CAD/CAM technology, all parts are completely produced out of carbon fiber.
Dynamic vs. Perfection
 

  •  New F5J specific airfoil- Exact camber changes must be made for each Flight Mode, this allows unbelievable range in speed.

  •  Thinner Fuselage

  •  Increased dihedral on wings tips allows for increased turning performance. Center joiner can be 3 or 5.3 degress. Wider flaps for increased landing control and wider ailerons for more precise handling.

  •  RTF weight starting at 1100g.

  •  Control of flaps and ailerons is available with our LDS system http://www.f3j.com/precision/lds/index.htm or delivered with 2mm GFK control horns

  •  Elevator and rudder are produced using machined solid core foam technology with low weights.

The PIKE Dynamic is delivered with pre-bonded pushrod housings in the fuselage, wire harness installed wings and supplied for fuselage, GFK control horns (if customer doesn’t order LDS) for ailerons and flaps, couplers for pushrods in fuselage, and 2mm carbon fiber pushrods.
Many pilots want extremely low flying weights but low weight won’t do you any good if you can’t get back to the landing tape. In F5J, competition results are often decided by who can catch a thermal and return from downwind.
It’s not necessary to write any more about the new Dynamic, better go try one for yourself.

Samba Models

 

 Building instructions here

FAI Pike Dynamic
The new F3J version, which at 1680g RTF fulfills the minimum loading in the F3J class and is very solid built for this class. With this FAI version, thanks to the use of partly other materials and improved model design, this version (built on the LS version) was able to achieve even higher strength at a lower weight. The model is fitted with our proven LDS system. We recommend the use of 22g servos such as JRDS 181, JRDS 187, KST X10 mini, Futaba S 3173svi and the like. Servos such as KST X12-508 are suitable for the fuse. The model is produced in both versions of cross tail and V-tail.

 Pike Dynamic also comes in electro versions and in combo F3J possibilities.
Both Vtail and Xtail can be delivered with nose for F3J or as a combo F5J/F3J.
We also deliver different length of nose for different motor weights!