Pike Precision 2 Electro

The Pike Precision 2 is now available with an Electro fuselage. If you already have a PP2 you can purchase a spare E-fuse and use your existing wings and tails!

But also perfectly suited for the new F3G category! 

Pike Precision 2 F3G version available now.
It was created by optimizing the very successful Pike Precision 2, best F3B model for the last two held World Championships F3B World Champion 2019 - Andreas Böhlen SUI and World Champion 2017 Bernhard Flixider AUT.
Strength and weight optimization of the entire model structure was carried out.
For better and easier control of the model in the thermal role, he got a 7.5° joiner instead of the original 6°.
The best equipment for F3G Pike Precision 2 F3G
Aluminum LDS - Samba model
Motor: Powerline 1520/10 TURBO F3G
Controller: YGE 65 or Castle Talon 60
Lipo HOT LIPS VHD 14,8V 1300 mAh 4S 90-150 C
Propeller: GM C.L. 15/10
Spinner: GM C.L.36/6
The minimum FAI RTF weight is 2224g. With the above components, the stated weight can be easily achieved.
Of course, for fun flying is possible use a cheaper engine - Dualsky outruner XM3045- EG8

  

 

A Czech guy have made some setup tricks you can read about in THIS .pdf document 

Recommended setups and pricing for F3G or general sport flying.

Option 1-Setup for fun flying (cheap but good)
RTF weight with F3B C80 version is 2100g.
RTF weight with Light 68 version is 1770g.

Motor : Dualsky XM3045EG-8  (or Dualsky XM3040EG-9 with 9x6)
XM3045EG-8 can be used with full power for more than 30seconds (aerobatic flying with several climbs)
ESC: Castle Talon 60
Battery: 600-1600mah 4S
Prop: GM 10x6 or GM 10x6C.L (can be bought from Samba or Samba dealers)
Spinner: GM 36/5C.L
- Installation servos in fuse 2 x MKS 6100HV under wing, behind joiner,
- Installation motor, controller, settings, etc, 
Motor tests in THIS pdf

10x6C.L and spinner GM 36/5C.L 10x6C.L and spinner GM 36/5C.L

Option 2-Setup for F3G Class

RTF weight with F3B C80 version is 2180g.
RTF weight with Light 68 version is 1850g.


- Motor: Powerline 1520 TURBO F3G,
- Controller: YGE 65,
or
- Castle Talon 60,
- Lipo HOT LIPS VHD 14,8V 1300 mAh 4S 90-150 C,

- Propeller: GM 16x8,
- Spinner: GM 36/6,
- Installation servos in fuse 2 x MKS 6100HV under wing, behind joiner
- Installation motor, controller, settings, etc, 

Option 3-Setup for F3G Class

RTF weight with F3B C80 version is 2160g.
RTF weight with Light 68 version is 1830g.


- Motor: Tenshock EDF 1530 2300 KV 5:1
- Controller: YGE 65,
or
-Castle Talon 60,
- Lipo HOT LIPS VHD 14,8V 1300 mAh 4S 90-150 C
- Propeller: GM C.L. 14x10,
- Spinner: GM C.L. 36/6,
- Installation servos in fuse 2 x MKS 6100HV under wing, behind joiner, 
- Installation motor, controller, settings, etc, 

For all options
-We recommend servos MKS 6100HV for fuselage
-We recommend servos KST X10, KST X10mini, JRDS 189, 181 or MKS6130 for flaps and
aileron
- Min. FAI RTF weight for F3G class is 2224 g.

All setups are designed for a maximum of 30 seconds engine flight at full power. The interval between flights must be at least 10min.
Cooling holes must be drilled in the engine bulkhead !

Prices do not includes VAT 21%

Alternatives for motors:

Motor : Dualsky XM3045EG-8 
ESC: 60A
Battery: 600-1600mah 4S
Prop: GM 10x6C.L (can be bought from Samba or Samba dealers)
Spinner: GM 36/5C.L

10x6C.L and spinner GM 36/5C.L 10x6C.L and spinner GM 36/5C.L



Motor : Leomotion L3038 – 3500
ESC: IGE 160 FAI
Battery: TP 1800 2 x 2s = 4S max 110 A
Prop: GM 17 x 13

Motor:Kontronik . KIRA 480 – 31/5,2
ESC:Phoenic Castle EDGE 100
Battery:Turnigy Nanotech 2 x 2250mAh 2S 65 – 130 C or Thunder Power TP 2250 2S G8 70C
Prop: RFM 14 x 8

Motor:Neu 1112G 1112/1Y S/6.7:1
ESC:Phoenic Castle EDGE 100
Battery:Turnigy Nanotech 2 x 2250mAh 2S 65 – 130 C or Thunder Power TP 2250 2S G8 70C
Prop: RFM 17 x 13